- Home
- >
- Products
- >
- Vacuum Truck
Our Vacuum Truck come in a wide variety of styles and of excellent quality. You can get the latest price and product information by sending an email.
Details
Vacuum Cleaner Truck ZLQ5180TSLGF6
Feature
Adopting the principle of "pure suction," "negative pressure" vacuuming, it consists of a walking system, a dust collection system, a primary dust collection box, a secondary dust collection box, a dust recovery system, etc. It has a wide operating range, high suction rate, It has the advantages of no secondary dust and high work efficiency. It is the preferred product for environmental sanitation cleaning and material recycling. It is especially suitable for municipal administration, highways, steel, cement, coal, non-ferrous metals, docks, yards, warehouses and other industries that are prone to dust pollution.
Parameter
Vehicle parameters | product number | ZLQ5180TSLGF6 |
Overall dimensions (length x width x height)mm | 7700×2495×3215 | |
Curb weight | 11000 | |
Total mass | 18000 | |
Rated contained mass | 6870 | |
Maximum driving speed km/h | 105 | |
Chassis parameters | Chassis model | EQ1185LJ9CDE |
engine model | YCS04200-68 | |
Engine power kW | 147 | |
Emission Standards | Country VI | |
Wheelbase mm | 4500 | |
Drive form | 4×2 | |
Chassis model | EQ1185LJ9CDE | |
engine model | YCS04200-68/B6.2NS6B21 | |
Engine power(KW) | 147/154 | |
Wheelbase(mm) | 3950 | |
Drive form | 4×2 | |
Special parameters | Working method | Suction sweep type/pure suction type |
Auxiliary engine model | B170-33 | |
Auxiliary engine power kW | 125 | |
Number of filter cartridges | 17 | |
Filter cartridge layout | Vertical column | |
Trash can volume m³ | 10 | |
Maximum cleaning width m | 3600 | |
Working speed km/h | 3-25 | |
Maximum inhalation particle size (equivalent)mm | 160 | |
Discharging angle | 45° | |
Operating temperature | -50℃~+50℃ | |
Fuel consumption in cleaning operations (8km/h speed) | 1.3L/10000㎡ | |
Maximum cleaning capacity㎡/h | 90000 | |
Absorption rate | 99% |
1. Use the auxiliary engine to drive the fan and other working devices, adopt vacuum suction, suction and sweeping combination, dry dust removal, and fully filtered air flow discharge, without secondary pollution. 2. The main suction inlet is located in the center of the rear of the car. It adopts a rear-mounted double-suction-tube pure suction nozzle working device layout, with a built-in dust-free roller brush and no backflush device. The side suction port and the main suction port can work independently or in conjunction with the left and right sides, ensuring that the vehicle can be swiped right or left independently during vehicle use. 3. The side sweep brush can automatically adjust the distance from the ground after being worn; the side sweep brush has a side suction port that can directly suck garbage into the garbage bin. There is no need to collect the garbage into the middle and then suck it into the box. The side sweeping brush operation is dust-free and preventive. Collision avoidance automatic reset function. 4. Use high-efficiency centrifugal fans, which fully filter the air intake and exhaust, and are environmentally friendly and dust-free. 5. The vehicle is equipped with automatic online dust cleaning and offline backflush cleaning systems, which can better clean the dust on the filter element. It uses non-woven polyester fiber material filter cartridges imported from Japan and is arranged in vertical rows. 6. The lifting and lowering of the garbage bin requires double oil cylinders and double safety struts. It can be controlled by the main and auxiliary engines separately or at the same time. The lifting can also be controlled by a hand oil pump, which is convenient. Maintenance in case of failure and high safety. 7. The vehicle does not have left and right canvas and cloth-covered rubber skirts. 8. The vehicle can be equipped with a handheld vacuum tube with a length of not less than 6 meters. The inner diameter of the tube is 150 mm and can inhale stones with a particle size of 100 mm. 9. A dry dust control mechanism (dust cover) for loading and unloading ash can be optionally installed at the rear of the vehicle. The cylinder operation in the cab can also be operated manually, which effectively suppresses the generation of secondary dust during unloading and truly achieves "dust-free" Moving”.
Get the latest price? We will reply as soon as possible (within 12 hours)